![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
![]() |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
![]() 1991 Dodge Stealth
1999 3000gt v4 ECU/Chrome I'm receiving a p0105 & p0110 with MAFT but not stock Karmen sensor. It does this on the stock ECU as well as the 99 flashecu I've tried both a 3'' and 3.5'' MAF with same faults. This unit formally had the wires spliced in so it could sit in the cab (former owner / local 3s guy). I removed the spliced in wire and soldered and heat shrink-ed each of the spliced wires but I'm not ruling that out as the cause. In evoscan I get a static IAT and baro value (don't remember the numbers atm) and the air flow hz does cycle. Is there anything else I should be checking or should I just send this unit in? Thanks! ~LeRoy |
#2
|
|||
|
|||
![]() knock knock knock...
Anyone come in here anymore? |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|