If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Full Throttle Speed Tech Support > Standard MAF Translator Support > MAFT General Discussion
User Name
Home Online Store Product Manuals FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Search this Thread Display Modes
Old 06-18-2014, 12:00 PM
LeRoyDL LeRoyDL is offline
Join Date: Jan 2007
Posts: 3
Default MAFT v2.01 CEL

1991 Dodge Stealth
1999 3000gt v4 ECU/Chrome

I'm receiving a p0105 & p0110 with MAFT but not stock Karmen sensor.
It does this on the stock ECU as well as the 99 flashecu

I've tried both a 3'' and 3.5'' MAF with same faults. This unit formally had the wires spliced in so it could sit in the cab (former owner / local 3s guy). I removed the spliced in wire and soldered and heat shrink-ed each of the spliced wires but I'm not ruling that out as the cause.

In evoscan I get a static IAT and baro value (don't remember the numbers atm) and the air flow hz does cycle.

Is there anything else I should be checking or should I just send this unit in?

Reply With Quote
Old 06-20-2014, 11:28 AM
LeRoyDL LeRoyDL is offline
Join Date: Jan 2007
Posts: 3

knock knock knock...

Anyone come in here anymore?
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 11:39 AM.

Powered by vBulletin Version 3.5.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright Full Throttle Speed & Style All Rights Reserved