If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Full Throttle Speed Tech Support > MAF Translator Gen 2 > GEN 2 General Discussion
User Name
Password
Home Online Store Product Manuals FAQ Members List Calendar Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-25-2015, 01:07 PM
Dean Dean is offline
Newbie
 
Join Date: Mar 2008
Location: San Francisco Bay Area
Posts: 11
Default Extender Extreme GEN 2 3rd gear scaler?

Are there 3rd (and 4th) gear boost and timing scalers in the GEN 2 Extender Extreme setup as there is on conventional and non-Extreme chips? If so, is there any programming options through the GEN 2 as to the percentages of WGDC and/or timing degrees?

I have looked but could not find any such reference.

Thanks!
__________________
Dean Nelson
Reply With Quote
  #2  
Old 03-25-2015, 03:52 PM
Dean Dean is offline
Newbie
 
Join Date: Mar 2008
Location: San Francisco Bay Area
Posts: 11
Default

Ah, this looks like what I was looking for. I kept search for 3rd/4th scalers, but it is actually 1st/2nd, sorta:

LoGear Fuel: The WOT AirFuel ratio in first and second gears can be varied using Parameter 15 Default value is 8. Each increment higher will richen the AirFuel mixture by 2%, each increment lower will enlean the mixture by 2%.

Low Gear WOT Spark. Spark advance in first and second gears at WOT can be programmed to be higher than in 3rd and 4th. Default setting for Parameter 10 is 8which is 2 degrees additional advance. This parameter is adjustable from zero additional degrees advance, to 4 degrees additional.
__________________
Dean Nelson
Reply With Quote
  #3  
Old 03-25-2015, 06:13 PM
TurboDave's Avatar
TurboDave TurboDave is offline
I spend too much time here
 
Join Date: Apr 2004
Location: Seymour, TN
Posts: 1,330
Send a message via MSN to TurboDave
Default

Pages 7 and 14 refer to WOT spark. The Aux WOT spark table can be triggered by the window switch if you tie it the 3rd gear signal to the ECM.
__________________
TurboDave EWCS(SW) USN (Ret.) (1965-1988)
Email us
Sevierville, TN
TranslatorPro MAFless fuel, spark, boost and fuel pump management

Now using SD2 system.

86 GN(TranlatorPro/ExtenderPro on speed density w/boost and fuel pump control,PLX-WB)
87 GN(stock, for show)
01 Excursion LTD 7.3L PSD(Power Stroke Diesel), Turbo, 4X2 (big puller)
12 Lincoln MKT, 3.5V6 Twin Turbo Ecoboost 365HP (driver)
Reply With Quote
  #4  
Old 03-25-2015, 06:53 PM
Dean Dean is offline
Newbie
 
Join Date: Mar 2008
Location: San Francisco Bay Area
Posts: 11
Default

Thanks, Dave.

I just need to remember to RTFM, eh?
__________________
Dean Nelson
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 05:59 PM.


Powered by vBulletin Version 3.5.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright Full Throttle Speed & Style All Rights Reserved