If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Full Throttle Speed Tech Support > MAF Translator Gen 2 > GEN 2 General Discussion
User Name
Password
Home Online Store Product Manuals FAQ Members List Calendar Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-04-2011, 09:06 AM
Rick87gn's Avatar
Rick87gn Rick87gn is offline
I spend too much time here
 
Join Date: Nov 2005
Location: Mokena, Il
Posts: 1,216
Default Setting up AFR Tracking on the GEN II (Turbo Buicks)

Once your wbo2 is set up and verified to be accurate you can configure the tracking feature in the AFR Tracking page.

Providing you are running a Extender G Chip, here is how it works.

The first three options are low limit settings. Once the mininum tps, rpm and load limits are met, afr tracking kicks in. Here are the settings I suggest to start with.

min tps 3.000
min rpm 3200
min load 166.4
lean lim % 10.0
rich lim %25.0
gain 12.0
afr 10.8 from 2000-8000
aux %0.0
af trdelay 0.3

From there set up the sensor monitor page to read AFR Des (Desired Air Fuel Ratio) and WB Corr (Wideband Fuel Correction). This is the page you want on when your out driving. When wb correction is triggered the AFR Des will appear and the WB Corr will show how much fuel is being added or subtracted.

Add or subtract fuel in the Tune High page to get WB Corr close to 0.

Generally the tune should be dialed in close before tracking is enabled.

Happy tuning!
__________________
**87 Buick GN**
109 block steel crank/mains
Ported Irons roller cam/rockers
Ported intake/acufab plenum PT front mount
70GTQBB 83lb injectors Razor alky
Maf Translator pro/LC-1 WB

Last edited by Rick87gn : 04-04-2011 at 06:39 PM.
Reply With Quote
  #2  
Old 08-15-2011, 10:10 PM
buddiiee buddiiee is offline
Newbie
 
Join Date: Jan 2006
Location: Here
Posts: 14
Default

Yea.... HOW do you KNOW the wideband is set up, AND accurate... What are you comparing it to?
Reply With Quote
  #3  
Old 11-13-2011, 06:07 PM
85 conversion 85 conversion is offline
Newbie
 
Join Date: Feb 2009
Location: baltimore
Posts: 5
Default Afr tracking

I'm using the gen 2 on my GN, is the correction supposed to say 100% as the correct setting? or is it supposed to read 0%? I was reading 100-105% and added fuel now im at about 94-96%.Any help would be great thank you.
Reply With Quote
  #4  
Old 11-14-2011, 02:32 AM
TurboBob TurboBob is offline
Resident Mad Scientist
 
Join Date: Mar 2004
Location: Near Detroit
Posts: 7,625
Default

what version of software is in your unit.

The early versions were 100% for no correction.

the later versions read 0.0 for 'zero' correction.

Bob
Reply With Quote
  #5  
Old 11-14-2011, 07:28 AM
85 conversion 85 conversion is offline
Newbie
 
Join Date: Feb 2009
Location: baltimore
Posts: 5
Default

I'll have to look but its the first version that you can use your guys 4" maf pipe.
Reply With Quote
  #6  
Old 11-15-2011, 05:09 PM
TurboBob TurboBob is offline
Resident Mad Scientist
 
Join Date: Mar 2004
Location: Near Detroit
Posts: 7,625
Default

I don't remember the first version with that change, but the afr tracking feature has not changed at all. Just the way the correction factor is displayed on the monitor page.

Bob
Reply With Quote
  #7  
Old 01-30-2013, 06:17 PM
nathanl70 nathanl70 is offline
Newbie
 
Join Date: Oct 2012
Location: Pasadena
Posts: 1
Default

Would the 10.8 AFR numbers Rick87gn posted be a good starting point running C-12?
Thanks
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 12:30 PM.


Powered by vBulletin Version 3.5.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright Full Throttle Speed & Style All Rights Reserved