If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Full Throttle Speed Tech Support > MAF Translator Gen 2 > GEN 2 General Discussion
User Name
Password
Home Online Store Product Manuals FAQ Members List Calendar Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-21-2007, 10:48 PM
TurboBob TurboBob is offline
Resident Mad Scientist
 
Join Date: Mar 2004
Location: Near Detroit
Posts: 7,625
Default Logging with a Gen-II

The low cost datalogging solution for the Gen-II uses the logging features of the shareware program TunerPro. This is the same software used to interface with the MAF Translator Pro, and requires a little re-configuration to use with the Gen-II.

Step 1: Get the pieces:
Order the Translator Pro communication cable from Full Throttle Speed, P/N 050TPROCABLE.
Download the Tunerpro RT software from the www.fullthrottletech.com forum. Registering the software is encouraged but not required for use.
Download the MG0010.ADS file from the www.fullthrottletech.com board

Step 2: Install and configure:
Install the Tunerpro software using the default folder selection.
Copy the MG0010.ADS file to c:\ProgramFiles\Tunerpro RT\datastreams
Launch Tunerpro and configure it.
Use the View/Toolbars menu selection to turn off all toolbars except RT, ALDL and ALDL Logging
Use View/Hide Item List to turn off the Item lists on the left side of the screen.
Use Tools/Preferences – ALDL Emulation tab.
Uncheck all boxes except “Load last Definition on startup” and "Detect Hardware at Startup"
Select “Translator Pro” for interface type.
Use the ALDL Setup page to load the MG0010.ADS file (this defines the communication with the Gen-II, and the display characteristics) Also set a default filename for Logging (logs are saved as “sessions” in this file)

Step 3: Logging:
The Autodetect button in the toolbar is used to detect the Gen-II
The double arrow button starts the communication
The Logging works like a VCR, with Record play and pause. Each log is saved as a "session" in your selected logfile.
The D button is a Dashboard and displays 6 numeric fields
The M button is a Monitor, and displays 4 running graphs
Right click on the display areas to select the data to be displayed there.
Attached Files
File Type: zip Datalogging with the MAF Translator Gen.zip (24.3 KB, 1514 views)
Reply With Quote
  #2  
Old 10-03-2007, 08:35 AM
Rick87gn's Avatar
Rick87gn Rick87gn is offline
I spend too much time here
 
Join Date: Nov 2005
Location: Mokena, Il
Posts: 1,216
Default

I cleaned this thread up and made it a sticky. For any questions, please start a new thread. Thanks!

Rick
Reply With Quote
  #3  
Old 02-15-2012, 07:05 AM
Reaper Reaper is offline
Newbie
 
Join Date: Jul 2009
Location: FL
Posts: 7
Default

The link is gone for the TunerPro RT
__________________
Rebuilt buy Don Cruz
Motor:5 over Wisco pistons,Don Cruz Billet roller cam,Comp roller Lifters,Adj. push rods,Front and two middle main caps,K1 Rods,ARP head bolts,ARP Main studs,Larger Valves & Ported heads,6262 Billet Precision Turbo,60 lb injectors from Turbo Tweek,LS1 MAF,MAF Translator Gen 2,PowerLogger,Razor Alky,3" exhaust,3.5" DP w/external wastegate,test pipe W/dump,Full Throttle EXTENDER EXTREME G chip,FP w/hot wire,Walbro FP,K&N filter,Scan master2700 stall,Built BFR 200R
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 10:29 AM.


Powered by vBulletin Version 3.5.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright Full Throttle Speed & Style All Rights Reserved