If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Full Throttle Speed Tech Support > Scanmaster & PowerLogger Support > PowerLogger Analysis
User Name
Password
Home Online Store Product Manuals FAQ Members List Calendar Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 07-29-2012, 09:17 PM
aminga aminga is offline
Senior Member
 
Join Date: Dec 2008
Location: Lacey's Springs, AL
Posts: 159
Default First Log on the new build

After the problems I've had rebuilding this one I'm nervous. THis is just a short hit around the block

I know it's rich. I had the boost turned down on the ISAC. ISAC is also reading slightly richer than the PL/Scanmaster.

Comments. Darn thing feels good.
Attached Files
File Type: dat test pass.dat (50.9 KB, 587 views)
__________________
Alan Minga
New Build DONE!
109 Block with stock crank and rods, Diamond Forged pistons, T&D 1.65 rockers, FTSS 206/210 roller, Ported Heads, TA6262 DBB, PTC 2800 LU
TT 6.1 Chip, ISAC Alky, Maf Translator and PLX Wideband,

Lacey's Spring, AL

Reply With Quote
  #2  
Old 07-30-2012, 08:01 AM
TurboDave's Avatar
TurboDave TurboDave is offline
I spend too much time here
 
Join Date: Apr 2004
Location: Seymour, TN
Posts: 1,330
Send a message via MSN to TurboDave
Default

Umm, all I see is a short recording of idle values.
__________________
TurboDave EWCS(SW) USN (Ret.) (1965-1988)
Email us
Sevierville, TN
TranslatorPro MAFless fuel, spark, boost and fuel pump management

Now using SD2 system.

86 GN(TranlatorPro/ExtenderPro on speed density w/boost and fuel pump control,PLX-WB)
87 GN(stock, for show)
01 Excursion LTD 7.3L PSD(Power Stroke Diesel), Turbo, 4X2 (big puller)
12 Lincoln MKT, 3.5V6 Twin Turbo Ecoboost 365HP (driver)
Reply With Quote
  #3  
Old 07-30-2012, 08:26 AM
aminga aminga is offline
Senior Member
 
Join Date: Dec 2008
Location: Lacey's Springs, AL
Posts: 159
Default

Oops. Wrong folder.
Attached Files
File Type: dat First logs.dat (74.8 KB, 527 views)
__________________
Alan Minga
New Build DONE!
109 Block with stock crank and rods, Diamond Forged pistons, T&D 1.65 rockers, FTSS 206/210 roller, Ported Heads, TA6262 DBB, PTC 2800 LU
TT 6.1 Chip, ISAC Alky, Maf Translator and PLX Wideband,

Lacey's Spring, AL


Last edited by aminga : 07-30-2012 at 08:29 AM.
Reply With Quote
  #4  
Old 07-30-2012, 10:30 AM
TurboDave's Avatar
TurboDave TurboDave is offline
I spend too much time here
 
Join Date: Apr 2004
Location: Seymour, TN
Posts: 1,330
Send a message via MSN to TurboDave
Default

Nothing I can see out of the ordinary. It was a short blast and only just over 1/2 throttle.
__________________
TurboDave EWCS(SW) USN (Ret.) (1965-1988)
Email us
Sevierville, TN
TranslatorPro MAFless fuel, spark, boost and fuel pump management

Now using SD2 system.

86 GN(TranlatorPro/ExtenderPro on speed density w/boost and fuel pump control,PLX-WB)
87 GN(stock, for show)
01 Excursion LTD 7.3L PSD(Power Stroke Diesel), Turbo, 4X2 (big puller)
12 Lincoln MKT, 3.5V6 Twin Turbo Ecoboost 365HP (driver)
Reply With Quote
  #5  
Old 07-30-2012, 10:50 AM
aminga aminga is offline
Senior Member
 
Join Date: Dec 2008
Location: Lacey's Springs, AL
Posts: 159
Default

Quote:
Originally Posted by TurboDave
Nothing I can see out of the ordinary. It was a short blast and only just over 1/2 throttle.

Just making sure. Around the neighborhood here traction is somewhat of a problem.
__________________
Alan Minga
New Build DONE!
109 Block with stock crank and rods, Diamond Forged pistons, T&D 1.65 rockers, FTSS 206/210 roller, Ported Heads, TA6262 DBB, PTC 2800 LU
TT 6.1 Chip, ISAC Alky, Maf Translator and PLX Wideband,

Lacey's Spring, AL

Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 01:38 PM.


Powered by vBulletin Version 3.5.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright Full Throttle Speed & Style All Rights Reserved