If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Full Throttle Speed Tech Support > Scanmaster & PowerLogger Support > PowerLogger Analysis
User Name
Password
Home Online Store Product Manuals FAQ Members List Calendar Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 10-08-2011, 11:24 PM
blackbuick blackbuick is offline
Newbie
 
Join Date: Apr 2011
Location: Granville, OH
Posts: 2
Default Some logs from the track, any advice?

I got some logs of my runs from the track and just want to know how they look and any advice on how I can improve. Here they are:

Run 1 File 2.dat = 12.61 @ 110.65 w/ 2.0 60ft

Run 2 File 4.dat = 12.41 @ 110.91 w/ 1.9 60ft

Run 3 File 5.dat = 12.17 @ 113.25 w/ 1.8 60ft

Run 4 File 6.dat = 12.15 @ 114.02 w/ 1.9 60ft

Run 5 File 7.dat = 12.40 @ 112.07 w/ 1.9 60ft
Attached Files
File Type: dat 2.dat (51.0 KB, 476 views)
File Type: dat 4.dat (51.0 KB, 386 views)
File Type: dat 5.dat (51.0 KB, 452 views)
File Type: dat 6.dat (51.0 KB, 386 views)
File Type: dat 7.dat (51.0 KB, 370 views)
Reply With Quote
  #2  
Old 10-10-2011, 01:24 PM
aminga aminga is offline
Senior Member
 
Join Date: Dec 2008
Location: Lacey's Springs, AL
Posts: 159
Default

What's the little RPM bump at about 9.4 seconds in File 5?

For that matter it's in File 6 too.
__________________
Alan Minga
New Build DONE!
109 Block with stock crank and rods, Diamond Forged pistons, T&D 1.65 rockers, FTSS 206/210 roller, Ported Heads, TA6262 DBB, PTC 2800 LU
TT 6.1 Chip, ISAC Alky, Maf Translator and PLX Wideband,

Lacey's Spring, AL


Last edited by aminga : 10-10-2011 at 01:30 PM.
Reply With Quote
  #3  
Old 10-11-2011, 12:05 AM
blackbuick blackbuick is offline
Newbie
 
Join Date: Apr 2011
Location: Granville, OH
Posts: 2
Default

Not exactly sure what that is, might be the converter locking after the transmission shifts out of 1st? I am concerned a little bit as to why my transmission is shifting from 2nd to 3rd at around 4700 rpm? I will get my mods in my sig here soon.
Reply With Quote
  #4  
Old 10-11-2011, 11:49 AM
aminga aminga is offline
Senior Member
 
Join Date: Dec 2008
Location: Lacey's Springs, AL
Posts: 159
Default

According to the logs you're already in third AND the converter is locked before that little bump takes place.

Locking the converter is really hard on the clutch disks.
__________________
Alan Minga
New Build DONE!
109 Block with stock crank and rods, Diamond Forged pistons, T&D 1.65 rockers, FTSS 206/210 roller, Ported Heads, TA6262 DBB, PTC 2800 LU
TT 6.1 Chip, ISAC Alky, Maf Translator and PLX Wideband,

Lacey's Spring, AL

Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 08:28 PM.


Powered by vBulletin Version 3.5.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright Full Throttle Speed & Style All Rights Reserved