ETPS Success!

[90t04]

Originally Posted by grimreaper

I tried getting the "dash" to link up to the pro, no luck. I can connect to the pro and download the bin but I'm having trouble figuring out how to link the XDF and ADX so I can log and watch the dash and real time monitors.

I could use a little help in this area too... I never saw if there was a solution to this.

I installed the 5.0 and was able to connect to the Translator Pro, update and download the bin's but I cant get it to monitor real time. I tried messing with the Acquisition settings and I am able to get the DA:Connected indicator to come on at the bottom but the data is all way off, like RPM 11589, etc.

I switched back to 4.14 and all was well again.

I tried several different firmware versions with the same results.

[TurboBob]

version 5 is a bit different than 4,

try these files

ETPS works. The setup is somewhat involved though.

B

[90t04]

Thanks, I will give those a go. Which s19 should I be using in the translator for the eTPS functionality?

[TurboBob]

the latest one would be best.

[90t04]

thanks I appreciate your help

[90t04]

I thinking maybe I have an outdated version of the tunerpro installer. When I try to load the TPro522 vehicle 0 test6.xdf in tunerpro I get this error message:

Failed to load C:\........\TPro522 vehicle 0 test6.xdf
XDF was created with newer version of the software

Edit: I found the updated beta and that fixed it