Full Throttle Speed Tech Support

Full Throttle Speed Tech Support (http://www.fullthrottletech.com/index.php)
-   MAFT General Discussion (http://www.fullthrottletech.com/forumdisplay.php?f=61)
-   -   loose wire translator connector (http://www.fullthrottletech.com/showthread.php?t=6853)

onebadsix 05-15-2014 07:13 PM

loose wire translator connector
 
The pink wire on the connector frm the translator to the 3.5 maf pulled out, probably to vibration . Blms pegged at 90, set a code 34 I think . Do I need a new connector , or can I repair the one I have im not familiar with these connectors . For now I the wire stuffed in the connector , I do need to repair it
Thanks
Randy


All times are GMT -4. The time now is 11:55 AM.

Powered by vBulletin Version 3.5.2
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright Full Throttle Speed & Style All Rights Reserved